Hey guys ive got an 07' Ranger Sport. I CANNOT find a 6 inch lift for it ANNNYWHERE! Does anyone make one? If not..what is the next best way to get at least a full 6 inches out of a lift, and is it still possible to run 33 12.50's without rubbing?

 

no on the lift. and 33x12.5x15 on 15x8 with oh 3.75 or 3.25 bs doesnt rub with a mild t-bar crank... no does on a 4" superlift or 5" RCD

 

well camburg has a 6" lift that is labeled for the edge, but it should fit the sport also.

 

33x12.5s won't fit without rubbing unless you lift. If you're 2wd, a spindle lift is gonna be your best bet. I'm not aware of anyone who makes a 6" lift for the torsion bar rangers.

 

camburg's setup only lifts 3 inches with the spindles... the rest comes from cranking the torsion bars

 

will cranking the tbars after the lift have the same effects that it does when you crank them w/o a the lift? ie bad ride and stuff

 

of course... why would it be any different?

the only difference with the camburg setup is it isnt so bad on your upper ball joints