3.0L V6 Flex cylinder identification please
#1
3.0L V6 Flex cylinder identification please
Thanks in advance for any help everybody.
I searched "flex cylinder" before I started a new post, got zero results.
I have:
2002 3L V6 Flex engine.
Check Engine code - misfire cylinder 3
If I am standing in front of truck facing engine. Which cylinder is number 3?
The FF engine is not shown in my Chilton book.
First thing I'll do is put in a new spark plug.
If that doesn't fix the problem, I'll swap the plug wire.
Thanks everyone
I searched "flex cylinder" before I started a new post, got zero results.
I have:
2002 3L V6 Flex engine.
Check Engine code - misfire cylinder 3
If I am standing in front of truck facing engine. Which cylinder is number 3?
The FF engine is not shown in my Chilton book.
First thing I'll do is put in a new spark plug.
If that doesn't fix the problem, I'll swap the plug wire.
Thanks everyone
#2
RF Veteran
iTrader: (1)
Ford 3.0l is the same FF or not.
FF vehicles have a fuel sensor and larger injectors, and of course a computer than can use them.
So #3 is the passenger side rear cylinder
3 6
2 5
1 4
Front
Yes, spark plug is a good place to start.
Before pulling it out I would unhook coil, for a no start, crank engine, then hook up the coil and pull out #3 spark plug.
Make sure spark plug is wet with fuel, that will tell you injector for #3 is working, so two birds with one wrench
FF vehicles have a fuel sensor and larger injectors, and of course a computer than can use them.
So #3 is the passenger side rear cylinder
3 6
2 5
1 4
Front
Yes, spark plug is a good place to start.
Before pulling it out I would unhook coil, for a no start, crank engine, then hook up the coil and pull out #3 spark plug.
Make sure spark plug is wet with fuel, that will tell you injector for #3 is working, so two birds with one wrench
Thread
Thread Starter
Forum
Replies
Last Post