99 tranny in a 92: Speed cable(mechanical) vs sensor(elec)
#1
#2
RF Veteran
iTrader: (1)
Best is to get a '94 or older trans with mechanical cable hook up on trans.
Or you can use this: ECD-100
To drive the old speedo/odo
Or swap out the speedo/odo in the dash to electronic
Clutch hose from master uses a Quick Connect fitting, it has a "U" shaped keeper that should be in the slots when reinstalling, so you simply push it on and the tapered end on the slave line pushes open the keeper and allows it to snap back into place locking master hose to slave nipple.
To remove you push out the keeper, there is a forked tool for that but a couple of screwdrivers will usually work.
Google: Ford clutch quick connect
Or you can use this: ECD-100
To drive the old speedo/odo
Or swap out the speedo/odo in the dash to electronic
Clutch hose from master uses a Quick Connect fitting, it has a "U" shaped keeper that should be in the slots when reinstalling, so you simply push it on and the tapered end on the slave line pushes open the keeper and allows it to snap back into place locking master hose to slave nipple.
To remove you push out the keeper, there is a forked tool for that but a couple of screwdrivers will usually work.
Google: Ford clutch quick connect
Thread
Thread Starter
Forum
Replies
Last Post