coolant gage differences? - Ranger-Forums - The Ultimate Ford Ranger Resource
Ford Ranger Forum - Forums for Ford Ranger enthusiast!

Go Back   Ranger-Forums - The Ultimate Ford Ranger Resource Arrow Ranger-Forums Technical Forum Arrow General Technical & Electrical

General Technical & Electrical General technical and electrical discussion for the Ford Ranger that does not fit in any other sub-forum.

LinkBack Thread Tools Search this Thread
Old 03-25-2010
allstateguy's Avatar
Thread Starter

I am: John Pfingstag
Join Date: Mar 2010
Location: Phoenix, AZ
Vehicle: 1995 Ford Ranger
Posts: 41
Total Props: 0
coolant gage differences?

I just put a 99 tach cluster into my 95 XLT 4.0
Basically everything works fine except the temp gage which varies between 3/4 and 7/8 and occasionally triggers the CHECK GAGES light. I'm thinking it is much more responsive than the original gage, BUT at too high a point.Does anyone know if the sender on the engine changed between 95 and 99? Could I just get a sensor for a 99 4.0 and screw it into the engine and plug the connector back on and have a correct reading temp gage? I really don't want to pull the cluster back out. I don't mind the high reading, but if my wife ever borrows the truck, I'll get a phone call.
Reply With Quote
+ 0 -
Old 03-25-2010
karrbass4life's Avatar
I am: Brandon K.
Join Date: Nov 2004
Location: Cincinnati, Ohio
Vehicle: 2001 Ford Ranger Edge 4x4
Posts: 3,072
Total Props: 0
I'm looking at Alldata and temperature sender F1SZ-10884-A was recalled in a TSB for a crimp being messed up and causing erratic readings.

Check TSB 95-13-2
Reply With Quote
+ 0 -

Similar Threads
Thread Thread Starter Forum Replies Last Post
Check gage light and no oil pressure reading Alon 4.0L OHV & SOHC V6 Tech 4 04-12-2007 01:24 PM
No gas gage, gas smell by the bed, pictures CadiLLacPimPin General Ford Ranger Discussion 8 01-23-2007 07:57 PM
Need help fast.....04 gage thingy the same as 01?? Fx4wannabe01 General Ford Ranger Discussion 7 12-10-2005 03:51 PM
Gas Gage (no pun intended) took a dump.. Is it fixable? rngprerunner General Technical & Electrical 10 10-10-2005 03:31 PM
Moving gas gage? rangererv General Technical & Electrical 7 04-01-2005 09:54 PM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -6. The time now is 12:57 AM.