HELP A FOOL, I’m in offset hell.
#1
HELP A FOOL, I’m in offset hell.
Hey guys, SUPER sorry if I’m posting this in the wrong spot. This is my first post and hoping I placed it in the right thread. I’m new to all of this, not super well versed in the realm of wheels and tires so I’m hoping you guys can help me out since I just placed an order for wheels and tires and quickly realized I might have made a mistake lol. Long story short, I have a 2011 ranger sport 4.0 4x4 w/ 3” BL. i ordered 32 x 11.5 R15 Goodrich ko2’s which after researching I’m pretty sure those will be fine. However the wheels have me shitting my pants, I ordered Pro Comp series 97 wheels with -44 offset 3.75 backspacing. In a perfect world I’d like the tires to stick outside the fender about an 1-1.5 inches (have the sport fenders) but just realized I have zero ******* clue what I’m talking about and should’ve done way more research on the offset but I’m reading so many conflicting things. That being said, will those rims even fit and if so are my wheels going to stick a foot out on either side of my truck or be underneath it on either side of my console lol? Help an idiot out! Thanks in advance guys. Hoping I can get some knowledge ASAP so I can cancel or change this order before it ships if I really **** the bed!
Last edited by Mmonzyk; 06-01-2021 at 08:38 PM.
#2
RF Veteran
iTrader: (1)
Ranger wheel guide here: https://www.therangerstation.com/tec..._fitment.shtml
Has the stock offsets and back spacing
Has the stock offsets and back spacing
Thread
Thread Starter
Forum
Replies
Last Post
Romaswake
Wheels & Tires Semi-Tech
11
07-08-2012 04:53 PM
andddrew says
Wheels & Tires Semi-Tech
12
06-07-2012 10:59 AM
crawly1025
Wheels & Tires Semi-Tech
7
10-17-2005 01:59 PM