2.9L & 3.0L V6 Tech General discussion of 2.9L and 3.0L V6 Ford Ranger engines.

3.0 Revving high on startup

Old Sep 6, 2011
  #1  
Hillyard's Avatar
Thread Starter
|
Member
iTrader: (8)
Joined: Jul 2007
Posts: 1,029
Likes: 1
From: Evansville, Indiana
3.0 Revving high on startup

Occasionally, my 2004 Ford Ranger 4x4 Automatic will rev up to about 2500 RPMs on startup then immediately idle down to 1200 and then 750.

It has 585XX miles on it and I recently replaced the IAC (From Ford) and spark plugs and wires were changed at 50k. I cleaned the throttle body but still having this issue.

It's almost like a vacuum leak but that would stay constant and I can't hear any whistling.

What else could it be? It's not throwing any codes.

Thanks in advance.
 
Reply
Old Sep 7, 2011
  #2  
OTRtech's Avatar
Member
Joined: Mar 2007
Posts: 2,598
Likes: 14
From: Upstate,NY
I would suspect the Intake Air Temperature sensor and the water temp sensor. The PCM maybe getting fooled into thinking the air temp is colder than it really is or that the engine is cold and richen the air/fuel mixture at startup .
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
buzz7453
2.9L & 3.0L V6 Tech
0
Mar 22, 2015 08:44 AM
Jeremy102579
2.9L & 3.0L V6 Tech
3
Feb 16, 2009 11:04 PM
gr8shot
General Technical & Electrical
11
Aug 7, 2008 11:06 AM
bmx4life
2.9L & 3.0L V6 Tech
5
Nov 14, 2007 09:44 AM
HAZZARDJOHN
4.0L OHV & SOHC V6 Tech
4
Oct 1, 2007 10:41 AM


Thread Tools
Search this Thread

All times are GMT -6. The time now is 08:30 AM.