4.0L OHV & SOHC V6 Tech General discussion of 4.0L OHV and SOHC V6 Ford Ranger engines.

04 4.0 RANGER A/C not working

Thread Tools
 
Search this Thread
 
  #1  
Old 05-30-2020
cfagan989's Avatar
Member
Thread Starter
Join Date: May 2020
Location: Fagan
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
04 4.0 RANGER A/C not working

Hey everyone, a while back while working on my ranger I accidentally disconnected the a/c hose from the mini radiator (or whatever it's called) and all of the freon escaped and I guess air filled the system. Prior to this happening the a/c worked great. I tried recharging the system and with appropriate levels of refrigerant it still blows room temp air. I wasn't worried about it before because I always have my windows down anyways, but now that its 90 degrees outside that's not cutting it. The a/c compressor seems to be working fine, and I'm guessing the issue has something to do with the air in the system but i'm not sure. Any ideas? Thanks!
 
  #2  
Old 05-30-2020
RonD's Avatar
RF Veteran
iTrader: (1)
Join Date: Jan 2014
Location: Vancouver, BC
Posts: 30,654
Received 2,823 Likes on 2,588 Posts
Yes, but its not the air per say its the moister IN the air that kills the accumulator or receiver/drier, thats the tank by the heater box, there is also an orifice tube(filter) than needs to be changed


The parts are not expensive, maybe $45

So you will have to evacuate the system again, did the new R134a "freon" have a dye in it?
If so look for leaks now before installing the new parts

Then recharge system

How long has the system had air in it?
And does the compressor(thing with the pulley) sound OK when its on?
 

Last edited by RonD; 05-30-2020 at 10:10 PM.
  #3  
Old 05-31-2020
cfagan989's Avatar
Member
Thread Starter
Join Date: May 2020
Location: Fagan
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Thanks for the reply, its had air in it for a couple months and the freon did not have dye. I'm not sure what an "OK" sounding compressor sounds like but it kicks on for a few seconds then stops and comes back on about 5-10 seconds later and it sounds alright. Also if I replaced those parts how do I "evacuate the system" without letting air in? thanks
 
  #4  
Old 05-31-2020
RonD's Avatar
RF Veteran
iTrader: (1)
Join Date: Jan 2014
Location: Vancouver, BC
Posts: 30,654
Received 2,823 Likes on 2,588 Posts
You would hear a bad compressor, grinding noise

You drain the system then put on the new parts and filter then refill it within a day or so, its weeks with air inside that ruins the drier, it collects moisture and if exposed to air too long it quits working
Think of a towel, works great to dry you off IF you leave it outside the shower door, if you bring it in the shower with you.............then it won't dry you off very well, but its the same towel??
LOL
 
  #5  
Old 06-02-2020
cfagan989's Avatar
Member
Thread Starter
Join Date: May 2020
Location: Fagan
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
I'll give that a try, thanks!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
StxDangerRanger
General Technical & Electrical
16
05-22-2011 06:49 AM
JBell
4.0L OHV & SOHC V6 Tech
8
05-16-2011 10:46 PM
seed60
General Technical & Electrical
10
06-08-2009 01:35 PM
Deviousfred
New Ideas
22
12-08-2006 08:51 AM
otterboy_99
General Technical & Electrical
4
10-07-2006 10:40 AM



Quick Reply: 04 4.0 RANGER A/C not working



All times are GMT -6. The time now is 04:59 AM.