Newbie here and I already have questions lol. I have a 2003 Mazda B3000 basically Ford ranger with a 3.0 picked it up from my brother working through the dreaded P0442 code I want to take the canister purge valve off so I can check it but the line coming out of it headed to the fuel tank looks pretty shabby at the purge valve already replaced the small one from the purge valve to the manifold. Under the hood where the rubber hose meets the metal hose that heads to the fuel tank I’m not sure about that white clamp what to expect if I start messing with it. The more I zoom in on this end of the hose it doesn’t look much better than the other end at the purge valve. I can’t find anything on the Internet about removing and replacing this hose. I’m probably way over thinking it but I hope somebody can tell me if I am or not. Any advice is greatly appreciated

 

Yes overthinking as usual came right off hose does need replaced purge valve does leak so replace this is the part number off the valve f87e-9c915-bb dang things aren’t cheap but the truck needs what it needs