help me figure this out.
#1
help me figure this out.
okay so we had the big snowstorm in mn/iowa area
and i go to put my truck into 4x4 high and it doesn't do anything
the light turns on but it doesn't engage. so i'm thinking great i'll need a shift motor.
then i was playing around with it today. and there will be times where it wil grind a tiny bit as its getting into 4x4 like it was just bad timing then it pops in.
so its shifting into it. but its still not in 4x4 high, low doesn't do anything either. the light on the dash comes on like normal relay clicks like normal.
i really don't want to bring this to a mechanic.
i did get new hubs installed little over a month ago but can't remember if i tried 4x4 high after or before and it worked.
and i go to put my truck into 4x4 high and it doesn't do anything
the light turns on but it doesn't engage. so i'm thinking great i'll need a shift motor.
then i was playing around with it today. and there will be times where it wil grind a tiny bit as its getting into 4x4 like it was just bad timing then it pops in.
so its shifting into it. but its still not in 4x4 high, low doesn't do anything either. the light on the dash comes on like normal relay clicks like normal.
i really don't want to bring this to a mechanic.
i did get new hubs installed little over a month ago but can't remember if i tried 4x4 high after or before and it worked.
#3
Thread
Thread Starter
Forum
Replies
Last Post
tigwelder
General Technical & Electrical
5
11-20-2010 08:46 PM
j99ranger4x4
General Technical & Electrical
8
04-05-2010 07:30 PM