3.0 Cam shaft position sensor
#2
It's mounted in the top of the cam syncronizer.
Passenger side , toward the firewall , on top.
Similar to the old distributors.
If you have a higher mileage truck , go to the dealer and get a new syncro assembly. Cost ~ $200
These are a known failure part and can do major engine damage when they go bad , as they also drive the oil pump.
Use the search button at the top of the pane and enter 'cam syncro'.
Many posts about this problem.
Passenger side , toward the firewall , on top.
Similar to the old distributors.
If you have a higher mileage truck , go to the dealer and get a new syncro assembly. Cost ~ $200
These are a known failure part and can do major engine damage when they go bad , as they also drive the oil pump.
Use the search button at the top of the pane and enter 'cam syncro'.
Many posts about this problem.
The following users liked this post:
PrettyPony (03-26-2022)
Thread
Thread Starter
Forum
Replies
Last Post