DWB 4x4 LT
#1
DWB 4x4 LT
This will be the thread I will update as I start hackn into the truck soon. So far I will just update it with the plans ahead and a few of the goodies I've gotten so far.
Plans:
- DBR 4x4 kit
- Glass front/rear (still not sure if I should try and go flareside or not)
- 35" bfg m/ts
- new 16x8 rims
- full bed cage
- cab cage
- mild motor work, cam, headers, tuner.
- seats/harnesses
- Giant 64 leafs, link killers in the future for them depending on when money allows.
- 4.88 gears
- locked rear..not sure maybe front.
- explorer rear axle.for now till I decide to go bigger.
- New bumpers front and rear along with some sliders
just a couple pics for now. I will be getn rims in the next week or so. I'm thinking either outlaw II's or somthning else cool but not super flashy or spendy. I will be getn 6 of them for 2 rear spares
175$ for some 3/4 or so tread bfgs couldnt pass em up. just need 2 spares now
new bender
Plans:
- DBR 4x4 kit
- Glass front/rear (still not sure if I should try and go flareside or not)
- 35" bfg m/ts
- new 16x8 rims
- full bed cage
- cab cage
- mild motor work, cam, headers, tuner.
- seats/harnesses
- Giant 64 leafs, link killers in the future for them depending on when money allows.
- 4.88 gears
- locked rear..not sure maybe front.
- explorer rear axle.for now till I decide to go bigger.
- New bumpers front and rear along with some sliders
just a couple pics for now. I will be getn rims in the next week or so. I'm thinking either outlaw II's or somthning else cool but not super flashy or spendy. I will be getn 6 of them for 2 rear spares
175$ for some 3/4 or so tread bfgs couldnt pass em up. just need 2 spares now
new bender
#6
thanks yeah I'm going to try and get as much as possible done before the trip. I think I will only be getting the front done for sure, and then a simple bed cage and the 64s with nice shocks on before then. then after I will spend most the summer getn it fully caged and some bypasses for the rear etc, and head to the dunes again in august.
#11
HELL YA.
why a 16" rim though, that will make tires a bit more expensive (when buying new)
if ya run rear glass, i would ditch the bed completely and sell it to someone needing a bed, and just mount bedsides off the cage..
not sure if budget allows, but would keep ya from needing to upgrade later. u can get a full floater complete minus 3rd member for $800 from shriener enterprise...
and i would not run 4/5pt harnesses until caged, definately do not mount the shoulder belts to the floor, it will pull you DOWN into the seat, instead of Back against the seat..
why a 16" rim though, that will make tires a bit more expensive (when buying new)
if ya run rear glass, i would ditch the bed completely and sell it to someone needing a bed, and just mount bedsides off the cage..
not sure if budget allows, but would keep ya from needing to upgrade later. u can get a full floater complete minus 3rd member for $800 from shriener enterprise...
and i would not run 4/5pt harnesses until caged, definately do not mount the shoulder belts to the floor, it will pull you DOWN into the seat, instead of Back against the seat..
#14
Yeah I'm in tune with all the cage standards and such. I will have to run a full tube bed just for the mere fact I don't have a regular bed to mount them to. I will get the rear cage done before the dunes but the cab will have to wait. I want it done,but I don't want to rush it. If I didnt have a flareside I might keep the bed, but its just easier for me to ditch it.
Oh and 16s only cause I found cheap tires for them.I have my 15s I may keep.or go 17s someday too
Rob not sure on cam yet,somthing mild paired with some 1.7 rr's for now.
Oh and 16s only cause I found cheap tires for them.I have my 15s I may keep.or go 17s someday too
Rob not sure on cam yet,somthing mild paired with some 1.7 rr's for now.
#15
#16
#17
#18
Thanks for the info rob I will into that for sure. Also the bender is a pro model 3 bender with some extras.
Yeah I'm sure rims will be ok since the kit reuses the stock spindle. If I had a custom I'm sure you might have to or for larger brakes etc.
Yeah I was always going to just keep it like it is or sas it,but I have always loved desert inspired trucks. I'm sure I will still make this next transformation come lookn mean.
Yeah I'm sure rims will be ok since the kit reuses the stock spindle. If I had a custom I'm sure you might have to or for larger brakes etc.
Yeah I was always going to just keep it like it is or sas it,but I have always loved desert inspired trucks. I'm sure I will still make this next transformation come lookn mean.
#19
#21
yeah in order to get it done quicker and the way I want before the dunes, I'm going to have to sell my motorcycle. But I guess now I dont have to worry about dying on it
I'll get some pics up of them mounted later next week. should look sweet. I'm going to get some outlaw IIs or somthing for my two spares.
I'll get some pics up of them mounted later next week. should look sweet. I'm going to get some outlaw IIs or somthing for my two spares.