2 inch drop
you guys may or may not have seen the awesome chop casper did for me, he lowered it a bunch and removed the stripes and leveled it out.
and after i saw it it grew on me .. ALOT http://i41.photobucket.com/albums/e2...ucklowered.jpg i want to lower it the cheap way since i dont have access to a fat wad of cash lol the front is already handled all i have to do is trim my coils about 1 to 1 1/2 coils but the real question is how do i drop the back end. i only want to drop it 2 inches wich is what ive been told flipping the hanger will allow me to do. how do i flip said hanger? |
grind off the rivet heads, hammer the rivets out once the heads are ground off.
Flip them over, bolt it back together using grade 8 bolts. |
do i have to remove my bed to do it?
|
yes, it helps alot if you remove the bed
|
thanks. i wonder when i can get this done
|
Im in Upland quite a bit, i can help you do this if you want
|
thats a nice offer.. i dont have a floor jack tho lol
|
ive done 2 4/5 drops now and i love em, i hear everyone on here thats lowered say if you only go 2/3 your gonna regret it....
|
that photoshop looks more like a 3-4 inch drop around than a simple 2 inch drop.
just save your money, do the 2 inch drop now but in the end it still looks stock |
how much does a 4/5 drop kit cost?
|
you are confused. you really want a 2" LIFT.
|
Lowering on a budget! - Ranger Power Sports Forum
2" Lowering Coils w/ rear hanger flip vs stock: http://i45.photobucket.com/albums/f8...t/IMG_7774.jpg |
Originally Posted by The_Punisher
(Post 1336852)
how much does a 4/5 drop kit cost?
Illusive Design and Fabrications :: shop :: Lowering Kits :: 98+ ranger 4/5 Lowering Kit W/ Shocks :: english |
Originally Posted by Smakes
(Post 1335979)
thats a nice offer.. i dont have a floor jack tho lol
|
that would be sick. is it doable in the street infront of my house LOL
|
smorrison1 and I lowered my truck in the street infront of his house, so yes it is doable!
|
so 08xlt4x4.. what do you think the timeframe on lowering it will be? all day project?
|
depends if you have touched suspension before or not, not something you should rush right through just to get it done even though its rather simple for the minor minor minor drop your doing.
just dont heat those coils up to much while cutting them or cut to much off. |
from what ive read and been told, one and a half coils is all i should cut off
|
woooo hoooo i get new brakes and an allignment on thursday!!!
08xlt4x4... i think the drop needs to be done soon! |
i wouldnt get an alignment until the after you do the drop.
common sense |
hence why i said it needs to be done soon lol
after that little **** in the honda hit me my wheels camber is phucked up. pulls to the right like you wouldnt believe |
save your money and order a djm 3/5
|
its not going to cost me anything but new grade 8 bolts and nuts, not much money to save their
|
but in the end its only 2 inch drop
|
All times are GMT -6. The time now is 09:00 AM. |
© 2024 MH Sub I, LLC dba Internet Brands