DWB 4x4 LT
I ended up using 2 gallons,I had 3 and could have probably used it all if I didnt try and rush the job the night before I left. It turned out ok,but it could be thicker. And if you plan on just spraying over the lights and windows to peel off after,make sure you get a good even thick coat over them like the rest of the truck. Otherwise you will be peeling little tiny pieces off all day,or using a razor blade. Or if you have the time just tape/paper off the areas you don't want dipped. And if you tape off any area that you want to stop the dip(like I did below my rear window on the back of the cab) take the tape off while its fresh and wet. If you wait it will peel up the dip in spots with it. I will say the stuff was fun to use,covers really well/fast and pretty much impossible to make it look bad cause it self levels so well.
Here are a few shots I never posted of the dip in progress.





Here are a few shots I never posted of the dip in progress.





I ended up using 2 gallons,I had 3 and could have probably used it all if I didnt try and rush the job the night before I left. It turned out ok,but it could be thicker. And if you plan on just spraying over the lights and windows to peel off after,make sure you get a good even thick coat over them like the rest of the truck. Otherwise you will be peeling little tiny pieces off all day,or using a razor blade. Or if you have the time just tape/paper off the areas you don't want dipped. And if you tape off any area that you want to stop the dip(like I did below my rear window on the back of the cab) take the tape off while its fresh and wet. If you wait it will peel up the dip in spots with it. I will say the stuff was fun to use,covers really well/fast and pretty much impossible to make it look bad cause it self levels so well.
Here are a few shots I never posted of the dip in progress.





Here are a few shots I never posted of the dip in progress.





Thanks for the response!
I'm tossing around the idea of dipping the truck after I get rear bedsides on and the 8.8 under it.
been reading over at dipyourcar.com about their kits and it seems cheap to do if you do it right!
I'm tossing around the idea of dipping the truck after I get rear bedsides on and the 8.8 under it.
been reading over at dipyourcar.com about their kits and it seems cheap to do if you do it right!
No prob! Yeah I had been looking at doing it for quite a while and finally pulled the trigger on one of their kits. Now I can just buy the sprayable gallons whenever I want to change the color and go right over the blue that's on there if I wanted.
Last edited by INT3RC3PTOR; Jul 18, 2013 at 05:21 PM.
Finally got another grill surround. Now I just need a new emblem or I gotta throw the black billet back in. But I kinda like the old honeycomb. This pic also reminds me I need to get after making my heim steering.
Thanks! I thought it was kinda different
And if you already have it dipped, you can just keep going over it with whatever color you want to do next.







