Zabeards SAS Thread
Originally Posted by mazda98
How did you manage to move the back mount up further,it looks like the white truch has no more adjustment left. 
if it goes higher the arm needs to be longer. think about it.
Originally Posted by elmo_4_vt
I'll let Zach give the real answer, but it looks like the upper control arms would be getting very close to the frame if you were only 3-4" above stock. As it is, I'll probably be taking off my body lift when completing my lift so that I'll still fit 35" tires and will be able to use as much lift (hence axle clearance) as possible.
my bottom door line is at 31-32 inches.
remember that the solid axle will allow the tire to move in a different motion so fender clearance will be different.
also i only have about 5~6 inches of up travel right now with the bottom of the door at 31~32 inches.
here is what i got done today.
back lower control arm mounts are tacked into place and the lower arms are adjusted.
also finished welding the hoops.
the truck itself
back lower control arm mounts are tacked into place and the lower arms are adjusted.
also finished welding the hoops.
the truck itself
Last edited by zabeard; Nov 6, 2007 at 06:01 AM.
Originally Posted by zabeard
me too but good luck getting here! they are arresting people if they are on the roads.
i bet theyd have a hard time keepin up with my locked 4wd in thier interceptor CVs, hahaha. this thing handles like a dream in the nasty.
Originally Posted by Big04Ranger
iv got my buddys 76 F-250 right now.. 390ci, 38.5 swampers... its fun.. until i remember that the only reason i have it is cause im plowin for him.. might get that call anytime now i hope
oh that would be fun
Originally Posted by 01xltranger4x4
Sweet, looks great man, are you still going to notch the frame? sorry if you already said it in a previos post i just clicked on the last page.
not sure yet. have not got that far to find out.
