Mag Lite mount
MagLite® Mounting Brackets (Asxd026) - Flashlight Accessories - Ace Hardware
Amazon.com: MAGLITE ASXD026 D-Cell Flashlight Mounting Bracket: Home Improvement
D Cell Maglite Mounting Brackets (MAGASXD026)
There’s a couple; chk local Ace Hdw…
ltr
p.s. maybe we need a grp buy ?????
Last edited by Scrambler82; Dec 10, 2009 at 09:19 AM.
just pay me what i spent on the clips ill just ship it out free lol
NOBODY stocks those and shipping for those tiny things from an online store double the price! haha. I'm pretty sure Ace sold out and never reordered those. I think I bought like 6 of those mounts including yours you bought from me.
lol my ace has them im pretty sure
ROFL!! When you say 'we' don't you mean 'me'?? hahahaha.
**Just so everyone knows, Ace Hardware in Sandy, Oregon has about 5 of those minimag clips priced at $3.99 each pair.
**Just so everyone knows, Ace Hardware in Sandy, Oregon has about 5 of those minimag clips priced at $3.99 each pair.
Hey guys,
Found a Site that Sells Mag-Lites and a lot of Accessories.
I needed a new Lens and thought I was going to have to buy a new light but low and behold they have it.
Ended up buy a few things I have been putting off, got them now.
Rick at this store was great , easy to work with and through in a few O-Rings to make my old light new.
Maglite Sales - Discount Maglite Flashlights - Buy Maglite, Minimag, Maglite Solitaire, Streamlight, Dorcy
No Custom MagLite Mounting but a lot of stuff.
Just some info.
Found a Site that Sells Mag-Lites and a lot of Accessories.
I needed a new Lens and thought I was going to have to buy a new light but low and behold they have it.
Ended up buy a few things I have been putting off, got them now.
Rick at this store was great , easy to work with and through in a few O-Rings to make my old light new.
Maglite Sales - Discount Maglite Flashlights - Buy Maglite, Minimag, Maglite Solitaire, Streamlight, Dorcy
No Custom MagLite Mounting but a lot of stuff.
Just some info.
lmao
That's my truck interior in that picture, and it's one of the very first mag light holders that the guy made. I was hanging out over on RPS at the time -- they kinda caught on a bit, and I remember the guy asked if he could use my photo for his ads. You might want to scour the board over there and get in touch with the guy that made them... I don't know if he has an account here on R/F or not....
That's my truck interior in that picture, and it's one of the very first mag light holders that the guy made. I was hanging out over on RPS at the time -- they kinda caught on a bit, and I remember the guy asked if he could use my photo for his ads. You might want to scour the board over there and get in touch with the guy that made them... I don't know if he has an account here on R/F or not....
Will see where it goes.
Not to steal his pattern… but it wouldn’t be hard to make on of these.
The only thing that might be hard to locate would be something I would like to add, some rubber bumpers on the inside of the unit to keep it from rattling.
Get some .062 Wall aluminum tubing, some aluminum straps .062 x 1.5 inch or what ever width you would need for mounting to the seat bolt.
Hmmmm… gotta think on this, no asking for orders just need to look into this.
Last edited by Scrambler82; Dec 13, 2009 at 03:02 PM.
Shane -- I think modbargains.com is the group that took up selling them for the guy, way back when.. didn't know Alon used to work there, tho... I got mine before modbargains.com picked them up as a product -- I think, besides the original designer/builder, mine was the first sold unit (it cost me $8.00, shipped! :-D )
Sandy -- there's just a couple strips of thin stick-on foam rubber (you can see them in the pics) that run down the interior wall of the aluminum tubing... doesn't rattle at all, and the 5-cell and/or 3-cell Mag Lite stays secure in there without sliding out on it's own.
Sandy -- there's just a couple strips of thin stick-on foam rubber (you can see them in the pics) that run down the interior wall of the aluminum tubing... doesn't rattle at all, and the 5-cell and/or 3-cell Mag Lite stays secure in there without sliding out on it's own.
Shane -- I think modbargains.com is the group that took up selling them for the guy, way back when.. didn't know Alon used to work there, tho... I got mine before modbargains.com picked them up as a product -- I think, besides the original designer/builder, mine was the first sold unit (it cost me $8.00, shipped! :-D )
Sandy -- there's just a couple strips of thin stick-on foam rubber (you can see them in the pics) that run down the interior wall of the aluminum tubing... doesn't rattle at all, and the 5-cell and/or 3-cell Mag Lite stays secure in there without sliding out on it's own.
Sandy -- there's just a couple strips of thin stick-on foam rubber (you can see them in the pics) that run down the interior wall of the aluminum tubing... doesn't rattle at all, and the 5-cell and/or 3-cell Mag Lite stays secure in there without sliding out on it's own.
I contacted modbargains.com, they said they didn’t have them, funny.
I will have to get back to them.
thanks,
Hey Guys...
I talked to Alon last night and he's about ready to start making those modbargains style maglite mounts in the very near future~!!
So stay tuned. I'll probably bump the thread when I find more out.
I talked to Alon last night and he's about ready to start making those modbargains style maglite mounts in the very near future~!!
So stay tuned. I'll probably bump the thread when I find more out.
Member
Joined: Sep 2006
Posts: 352
Likes: 0
From: Windsor Ontario
I found the guy on RPS Forum; PM him.
Will see where it goes.
Not to steel his pattern… but it wouldn’t be hard to make on of these.
The only thing that might be hard to locate would be something I would like to add, some rubber bumpers on the inside of the unit to keep it from rattling.
Get some .062 Wall aluminum tubing, some aluminum straps .062 x 1.5 inch or what ever width you would need for mounting to the seat bolt.
Hmmmm… gotta think on this, no asking for orders just need to look into this.
Will see where it goes.
Not to steel his pattern… but it wouldn’t be hard to make on of these.
The only thing that might be hard to locate would be something I would like to add, some rubber bumpers on the inside of the unit to keep it from rattling.
Get some .062 Wall aluminum tubing, some aluminum straps .062 x 1.5 inch or what ever width you would need for mounting to the seat bolt.
Hmmmm… gotta think on this, no asking for orders just need to look into this.
Andrew
“Jdog1928", at least it is the person that I determined to be the originator.
Could be wrong, wouldn’t be the first time so play it by ear.
ltr and keep me in on it too.
Could be wrong, wouldn’t be the first time so play it by ear.
ltr and keep me in on it too.
Who is going to make these Mounts ?
Should they be made from Aluminum or thin walled Steel ?
Batter up !
