Have you tried ruff stuff? Supposedly they have a quick turn around

 

Damn Zack, I would think those items could at least be next day shipped. Seem like stockpiled items to me.

 

I had to tell them to send me what they had. I still dont have my full order from them!

 

Ya i bought some heims for the steering on our mud truck just not as good of quality imo the high misalignment spacer has thin metal slivers pealing off it idk whats up with that lol.
I got my tube adapters and .99 cent brackets today from ballistic it says on my bill the bushings are back orderd which is what i really need to get started!

 

Called ballistic and there shipping my bushings to me tmrw morning they didnt ship out because the inner sleeves hadent been plated yet so i will just paint them and put a ton of antisieze on em.

 

Truss is done and got just about everything painted up all pretty!

 

looks ready for the apacalypse.GNAR!

 

Haha ya shes beefy. hoping to pick up gears locker and instal kit friday.

 

nice work

 

Thanks!

 

40" on the lowers
33" on the upper

 

Thank you! Is that from center of the bolt to center of the bolt?

 

correct!

what size tires are you running? i am thinking about remaking mine with a bend in them because my 42s hit bad. either that or triangulated 4 link and hydro steering. ditch the panhard and drag link all together.

 

I will be running 37's on mine for a while planning on 42's though.
Ill try and get em to not hit i dont rub my radius arms right now so id like to keep it that way.
I need hydro assist of full hydro bad! cant hardly turn the 37's when shes bound up.
Im suprised you havent went full hydro yet.

 

Mine turns decent. I never wanted to spend any money on hydro since 2008 when I bought the 5.4. Wasn't sure what pump or steering box I'd have if Any at all. So it's coming next winter I'm sure.

 

Ya thats when i plan on doing mine also.
Picking up my gears and locker and everything today after work!!!!!

 

very nice! get to work!

 

Well got my locker king pin rebuild kits ring and pinion install kit and a few other things i was going to get the axle under it this weekend but ballistic didnt come through with the bushings...

 

Installed new hub seals greased bearings and primered hubs. Also removed lower king pin races. Gonna pull the 44 tmrw and start cleaning everything up for the 60 to be installed. Waiting on ballistic for my bushings and ECGS for my king pin removal tool now.

 

Waiting parts to go any further.
44 out 60 just sittin under there.

 

3/4'' snap on impact vs king pins... king pins aint go **** haha
But ya king pins are out and new opnes are in goin to machine shop tmrw morn then hope to get the knucks and everything on tmrw.

 

looks good! mine were a pain to get out.

 

Ya i had both mine out in about 5 minutes haha way easier then i thought. My brother got a new 3/4 snap on impact a month or so ago that plus a little heat and they spun right out.
Well today i had to go machine my tube adapters just had to turn em down 30 thou. got that done then i pulled the old coil buckets off and cleaned up the frame a lil bit.
Hoping i have it a roller this weekend then order my coilovers.
few pics.

 

be sweet to see it on its feet!

 

Yup got to be done by june 10 to thats our dunes trip for this year.